Integrated Engineering Solutions

Air Lubrication System (ALS)

Controlled air release beneath the hull to reduce wetted-surface friction

Selected capability

Air Lubrication System (ALS)

Controlled air release beneath the hull to reduce wetted-surface friction

The system compresses, distributes and releases air beneath the hull to form a controlled air layer/bubble region, with supply adjusted against speed, draft and pressure feedback. Net benefit is strongly vessel-specific and depends on bottom geometry, flat area, speed and sea state.

01Targets hull friction without changing the basic propulsion principle
02Can be combined with shaft-generation and hydrodynamic measures
03Control can modulate air flow with speed/draft to avoid unnecessary compressor power
Discuss this project
Air Lubrication System (ALS) schematic
Technical principle / system relationship
System relationship

Make the interfaces clear before equipment selection.

This flow is a quick view of the system boundary. Final quantities, interfaces and configuration remain vessel- and project-specific.

01Compressors
02Air manifold
03Control valves
04Release units
05Monitoring
01

Typical configuration & scope

  • Air compressor/blower package
  • Air manifold, valves and zone control
  • Hull-bottom release units
  • PLC/ICMS interface and pressure/flow monitoring
02

Information required

  • Hull lines, bottom structure and compartment arrangement
  • Design speed and principal draft conditions
  • Available electrical power and machinery space
  • Planned docking window and hull-opening constraints
03

Engineering focus

  • Evaluate net benefit after compressor power is deducted
  • Locate release units with hull structure and flow field considered
  • Control, monitoring, isolation and fail states must satisfy class expectations
04

Standards & technical basis

  • CCS Guidelines for Ship Air Lubrication Drag Reduction Systems (2026)
  • Class structural/electrical requirements

Applicable rules, certificates and approval scope are confirmed against vessel class, flag and contract requirements.

From data to delivery

One delivery logic, with engineering depth adapted to each capability.

  1. 01Define duty & constraints
  2. 02Engineering / selection / interfaces
  3. 03Manufacturing / sourcing / approvals
  4. 04Installation / commissioning / verification
  5. 05Handover / lifecycle support