Integrated Engineering Solutions

Rudder Bulb

Break up the propeller hub vortex, recover rudder pressure and reduce rotational wake loss

Selected capability

Rudder Bulb

Break up the propeller hub vortex, recover rudder pressure and reduce rotational wake loss

A rudder bulb is positioned in the propeller-hub wake region at the rudder leading edge. It improves propulsive efficiency by weakening the hub vortex, recovering pressure on the bulb/rudder and reducing rotational wake losses. Geometry and position must be optimised with shaft axis, propeller hub, rudder form and clearances.

01Reduce propeller-hub vortex and rotational wake losses
02The supplied reference states an indicative 1–1.5% saving range for a rudder bulb; vessel-specific verification is required
03Can be co-optimised with HEP, pre-swirl duct and boss-cap fins
Discuss this project
Rudder Bulb
Rudder-bulb arrangement reference
Rudder Bulb schematic
Technical principle / system relationship
System relationship

Make the interfaces clear before equipment selection.

This flow is a quick view of the system boundary. Final quantities, interfaces and configuration remain vessel- and project-specific.

01Hub vortex
02Rudder bulb
03Pressure recovery
04Wake straightening
05Verification
01

Typical configuration & scope

  • CFD wake and hub-vortex analysis
  • Rudder-bulb shape and position design
  • Structural/welding and clearance verification
  • Installation survey and sea-trial/performance verification
02

Information required

  • Rudder, propeller and shaft-line drawings
  • Hub dimensions and propeller–rudder clearance
  • Speed, draft, engine power and rpm
  • Vessel-performance or CFD/model-test baseline data
03

Engineering focus

  • Check cavitation, pressure pulses, rudder loads and structural clearances
  • Define geometry and position from vessel-specific hydrodynamic analysis
  • Use comparable operating conditions for before/after verification
04

Standards & technical basis

  • Class structural approval as applicable
  • Vessel-specific CFD / performance verification

Applicable rules, certificates and approval scope are confirmed against vessel class, flag and contract requirements.

From data to delivery

One delivery logic, with engineering depth adapted to each capability.

  1. 01Define duty & constraints
  2. 02Engineering / selection / interfaces
  3. 03Manufacturing / sourcing / approvals
  4. 04Installation / commissioning / verification
  5. 05Handover / lifecycle support