Integrated Engineering Solutions

Shaft Generator System

Use propulsion-shaft power for shipboard generation and reduce auxiliary-generator running

Selected capability

Shaft Generator System

Use propulsion-shaft power for shipboard generation and reduce auxiliary-generator running

A shaft-generator (PTO) system uses available main-engine/shaft-line power for generation and supplies stable power to the main switchboard through conversion and grid-connection equipment, reducing auxiliary-generator operation at sea. Shafting, torsional vibration, harmonics, protection and PMS logic must be verified together.

01The supplied PTO reference states an indicative 3–5% fuel-saving range; actual benefit depends on main-engine loading, auxiliary-generator efficiency and voyage profile
02Reduce auxiliary-generator running hours, fuel consumption and associated maintenance
03Use power conversion to tolerate shaft-speed variation and coordinate load sharing/modes with PMS/EMS
Discuss this project
Shaft Generator System
Shaft-generator system reference image
Shaft Generator System schematic
Technical principle / system relationship
System relationship

Make the interfaces clear before equipment selection.

This flow is a quick view of the system boundary. Final quantities, interfaces and configuration remain vessel- and project-specific.

01Main engine
02Shaft
03Generator
04Converter
05PMS & grid
01

Typical configuration & scope

  • Shaft generator and mechanical coupling
  • Frequency-conversion / rectifier-inverter stage
  • Filters, transformer and grid protection
  • PMS/EMS control interface
02

Information required

  • Main engine / gearbox / shaft-line data
  • Shaft-speed range and available power
  • Ship-grid voltage/frequency and fault level
  • Generator load profile and PMS logic
03

Engineering focus

  • Verify torsional vibration and shaft-line compatibility first
  • Address harmonics, selective protection and synchronising as a system
  • For retrofits, prioritise space, foundation and off-hire planning
04

Standards & technical basis

  • Class shafting/electrical rules
  • IEC marine electrical practice

Applicable rules, certificates and approval scope are confirmed against vessel class, flag and contract requirements.

From data to delivery

One delivery logic, with engineering depth adapted to each capability.

  1. 01Define duty & constraints
  2. 02Engineering / selection / interfaces
  3. 03Manufacturing / sourcing / approvals
  4. 04Installation / commissioning / verification
  5. 05Handover / lifecycle support