Integrated Engineering Solutions

Vessel Electrification Retrofit

Re-engineer propulsion, storage, shore connection and energy management as one system

Selected capability

Vessel Electrification Retrofit

Re-engineer propulsion, storage, shore connection and energy management as one system

For newbuilds and existing vessels, evaluates full-electric, hybrid, DC-bus, peak-shaving and electric-propulsion architectures. Design addresses propulsion redundancy, battery safety, thermal management, protection, class approval and available space together.

01Reduce inefficiency from low-load and frequent start/stop operation
02Use storage for peak shaving, silent or zero-emission windows
03Coordinate generation, storage, propulsion and hotel load in one control layer
Discuss this project
Vessel Electrification Retrofit
Vessel reference image
Vessel Electrification Retrofit schematic
Technical principle / system relationship
System relationship

Make the interfaces clear before equipment selection.

This flow is a quick view of the system boundary. Final quantities, interfaces and configuration remain vessel- and project-specific.

01Energy source
02DC/AC bus
03ESS
04Propulsion drive
05EMS
01

Typical configuration & scope

  • Battery ESS and BMS
  • Converters / DC bus / distribution
  • Propulsion motor and drive
  • EMS/PMS and shore/charging interface
02

Information required

  • Mission profile, route and power demand
  • Existing propulsion and generation diagrams
  • Peak/continuous load and endurance requirement
  • Space, weight, cooling and fire-safety conditions
03

Engineering focus

  • Define battery zoning, thermal-runaway and fire strategy early
  • Verify fault level, protection selectivity and redundancy at system level
  • Retrofits require 3D survey plus weight/CG installation assessment
04

Standards & technical basis

  • Class battery/electric propulsion rules
  • IEC 60092 series where applicable

Applicable rules, certificates and approval scope are confirmed against vessel class, flag and contract requirements.

One-stop project delivery

From vessel survey to commissioning and lifecycle support.

01

Vessel survey

For newbuilds, system design is developed around applicable marine rules. For retrofit vessels, engineers carry out an onboard survey and can use 3D scanning to capture machinery-space layout and installation constraints.

02

Solution development

Develop a newbuild or retrofit solution around the actual vessel, then validate technical feasibility, installation feasibility and operational suitability together with the owner.

03

Production & delivery

After contract execution, organise equipment manufacturing, certification submission, system integration and factory testing, then package and deliver the approved system onboard.

04

Installation & acceptance

For newbuilds, support the yard through installation and commissioning. For retrofits, remove existing machinery as required, reinstall the new system, complete onboard commissioning, system integration, sea trial verification and final owner acceptance.

05

After-sales & lifecycle service

During the warranty period, provide warranty service, remote diagnostics, onboard inspection and preventive maintenance to support reliable long-term operation.