Integrated Engineering Solutions

Pre-swirl Duct / PFFP

Condition and pre-swirl propeller inflow to improve propulsive efficiency

Selected capability

Pre-swirl Duct / PFFP

Condition and pre-swirl propeller inflow to improve propulsive efficiency

A duct or pre-swirl stator is positioned upstream of the propeller to condition local velocity and swirl. Its geometry must be optimised together with stern form, wake distribution, propeller loading and structural installation constraints.

01Improve propeller-plane inflow uniformity and introduce beneficial pre-swirl
02The supplied reference states an indicative 2–5% saving range for PFFP; CFD/testing is required for the actual vessel
03The reference gives an indicative 4–6% range for PFFP+FPHC; combined benefits must not be added arithmetically
Discuss this project
Pre-swirl Duct / PFFP
Pre-swirl device reference image
Pre-swirl Duct / PFFP schematic
Technical principle / system relationship
System relationship

Make the interfaces clear before equipment selection.

This flow is a quick view of the system boundary. Final quantities, interfaces and configuration remain vessel- and project-specific.

01Hull wake
02Duct
03Pre-swirl
04Propeller
05Thrust
01

Typical configuration & scope

  • CFD flow-field analysis
  • Duct/stator geometry design
  • Structural strength and supports
  • Onboard survey and installation verification
02

Information required

  • Hull lines and stern structure
  • Propeller drawings and rpm
  • Design speed/drafts and engine power
  • Recent trial or performance data
03

Engineering focus

  • Position and angle should come from hydrodynamic analysis
  • Check propeller clearances, cavitation and vibration risk
  • Consider structural loads and welding scope in class submission
04

Standards & technical basis

  • Class structural approval as applicable

Applicable rules, certificates and approval scope are confirmed against vessel class, flag and contract requirements.

From data to delivery

One delivery logic, with engineering depth adapted to each capability.

  1. 01Define duty & constraints
  2. 02Engineering / selection / interfaces
  3. 03Manufacturing / sourcing / approvals
  4. 04Installation / commissioning / verification
  5. 05Handover / lifecycle support